fixing ui stuff

This commit is contained in:
Joren de Graaf
2026-10-09 19:10:42 +02:00
parent dad0001df1
commit 2b0bbdd201
12 changed files with 175 additions and 27 deletions
+2 -2
View File
@@ -6,6 +6,6 @@ The pinned official support commit is `aaf395c1bbd86f7c5b7a2f9f0401241ff5c44956`
The codec API reports success/failure for a requested read, but not the actual byte count. The firmware clears the raw buffer, discards failed reads, and aborts an active clip; short successful reads cannot be measured through this wrapper. `AUDIO_MIC_SLOT=0` selects one fixed stereo slot. This assignment is **not physically verified**; inspect a V2 recording and slot levels before field deployment.
The firmware retains the Arduino sketch layout because the official support expects that structure and no PlatformIO toolchain is currently installed. Use Arduino IDE 2.x, Espressif ESP32 Arduino core 3.3.0, board `ESP32S3 Dev Module`, 8 MB flash, enabled 8 MB PSRAM, Waveshare's pinned LVGL8 (`lvgl` 8.4.0), and ArduinoJson 7.4.3. Run `./prepare_from_waveshare.sh` to copy the pinned official support. The copied support and build products are ignored by Git. The `codec_board` support has Espressif Modified MIT licensing, `esp_codec_dev` has Apache-2.0, ArduinoJson has MIT, and LVGL has MIT. The Waveshare repository has no top-level license statement; preserve upstream attribution and check redistribution terms before vendoring its files.
The firmware retains the Arduino sketch layout because the official support expects that structure and no PlatformIO toolchain is currently installed. Use Arduino IDE 2.x, Espressif ESP32 Arduino core 3.3.12, board `ESP32S3 Dev Module`, 8 MB flash, enabled 8 MB PSRAM, Waveshare's pinned LVGL8 (`lvgl` 8.4.0), and ArduinoJson 7.4.3. Run `./prepare_from_waveshare.sh` to copy the pinned official support. The copied support and build products are ignored by Git. The `codec_board` support has Espressif Modified MIT licensing, `esp_codec_dev` has Apache-2.0, ArduinoJson has MIT, and LVGL has MIT. The Waveshare repository has no top-level license statement; preserve upstream attribution and check redistribution terms before vendoring its files.
Build, flash, and serial monitor from Arduino IDE at 115200 baud. Arduino CLI 1.5.1 compiled this sketch with ESP32 core 3.3.0, `FlashSize=8M`, `PSRAM=opi`, and `PartitionScheme=default_8MB`. The reported program size was 1,350,599 bytes (40% of the selected application partition), with 99,368 bytes (30%) of global dynamic memory. A successful compile does not establish microphone, display, SD, TLS, or power behavior; no board was flashed.
Build, flash, and serial monitor from Arduino IDE at 115200 baud. Arduino CLI 1.5.1 compiled this sketch with ESP32 core 3.3.12, `FlashSize=8M`, `PSRAM=opi`, and `PartitionScheme=default_8MB`. The reported program size was 1,513,404 bytes (45% of the selected application partition), with 101,808 bytes (31%) of global dynamic memory. A successful compile does not establish microphone, display, SD, TLS, or power behavior; no board was flashed.